Now KOOLGLIDE Technology
for Hard Surfaces

January 31st, 2009 | Category: Products

Introducing – the Instafast System. Now, with the Instafast System from KOOLGLIDE, unsightly face nailing can be eliminated and tedious board replacement is made easy. Just put the board in place over the KOOLGLIDE Utility Tape. Then use the KOOLGLIDE PRO-W to activate the tape right through the board. This system uses patented Sinch® Technology to remotely activate a specially designed tape.
It’s safe, fast, easy and strong. If you make a mistake just reverse the bond and redo. And, it works on carpet too.

KOOLGLIDE Technology for Hard Surfaces

KOOLGLIDE PRO-W Applications:

Starter and finish rows without face nailing – For many hard wood fastening jobs, face nailing is the only answer. But face nailing is visible from the surface and requires matching and filling. With the KOOLGLIDE, simply put the boards in place and hit the power button.
Board replacement – The trouble with conventional methods of board replacement is that once you have the board in place, you have to carefully remove it. This is difficult and sometimes damages the board. With KOOLGLIDE you put the tape behind the board. Then when the board fits perfectly, activate the tool.
Decorative tile – The KOOLGLIDE with utility tape is great for decorative tile applications such as base and back splash. Remember, the adhesive on the utility tape is non-structural adhesive and should be used only where the tile is supported.


No Comments Yet - You can be the first to comment!

Leave a comment